Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

11.15. Headlights

THE GENERAL DATA

Screws for bunch adjustment halogen lamps

1. A bolt And for horizontal adjustment 2. A bolt With for vertical adjustment 3. A bolt In for horizontal adjustment

4. Level of horizontal adjustment 5. Level of vertical adjustment

Marking of the screen for adjustment of a beam of light of headlights

1. A line on distance from a floor to the centre of headlights 2. Area of a light stain 3. A line on distance from an axis of symmetry of the car to the centre of headlights 4. An axis of symmetry of the car 5. Distance of 7,5 m 6. A forward plane of a headlight

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight. Headlights with not folding optical element 2. Remove headlight facing. On cars FJ62 remove a plafond of the index of turn. 3. At headlight removal it is forbidden to rotate подпружиненные screws of adjustment of a bunch. 4. Turn away screws of fastening of a framework and remove a framework of an optical element, keeping a headlight. 5. Submit a headlight outside and disconnect a socket. Remove a headlight. 6. Attach a socket, сориентировав a new element so that the cast figures on a lens have been turned upwards. 7. Establish a framework, tighten screws, insert a spring. 8. Check up bunch adjustment (if the adjusting screw rotated). Galogennye headlights The prevention Galogennye lamps газонаполненные, under pressure. It is forbidden to undertake a lamp cylinder. The polluted lamp wipe the pure napkin moistened with spirit. 9. Disconnect a socket from the back party of a headlight. 10. Turn the holder counter-clockwise and get from the case. 11. Pull a lamp and get from the holder. Insert a new lamp, without concerning a cylinder. 12. Attach a socket and check up headlight work.

Adjustment

---

The prevention

It is necessary to check adjustment of headlights each 12 months, at replacement of a headlight or after repair of a forward part of a body. It is necessary to notice that described procedure allows to adjust approximately only headlights, exact adjustment is carried out in car-care centre.

---

PERFORMANCE ORDER

1. On the case of a headlight with not folding optical element are provided 2 подпружиненных the screw for adjustment in vertical (from above) and horizontal (sideways) planes. 2. Adjustment halogen headlights is provided with screws on the case (fig. Screws for bunch adjustment halogen lamps see). Rotation of screws regulates the central position of the index of the level located in the top part of a headlight. 3. The elementary way of adjustment consists in bunch installation on a marking on the screen (wall). 4. Designate a tape перекрестия symmetrically axes of the car (fig. the Marking of the screen for adjustment of a beam of light of headlights see). For more exact marking approach on a wall on distance nearby 20 see 5. Establish the car in 7,5 m from a wall. 6. Adjustment is carried out at normal loading of the car and a thin tank. Establish a bunch of a passing light of headlights so that the light stain settled down on 5 sm below a horizontal and on 5 sm more to the right of a vertical. For bunch lifting rotate the screw clockwise and on the contrary. The Same concerns adjustments to the left-to the right. 7. Include a headlight of headlights and adjust a bunch so that the stain was strictly on a vertical line, directly under a horizontal. The prevention Precisely to expose bunches distant and a passing light in such a way it can appear impossible. In this case try to adjust more precisely a passing light with which it is necessary to go more often and on which traffic safety in a greater degree depends. 8. As soon as possible adjust headlights in car-care centre.