Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
   8.1. Technical characteristics
   + 8.2. ABS-system
   8.3. Колодки disk brakes (forward or back)
   8.4. A brake support
   8.5. A brake disk
   8.6. Колодки drum-type brakes
   8.7. The wheel cylinder of brakes
   8.8. The main cylinder of brakes
   8.9. Hoses and hydrodrive tubes
   8.10. Removal of air from a hydrodrive of brakes
   8.11. The vacuum amplifier of brakes
   8.12. Колодки a manual brake of back disk brakes
   8.13. Adjustment of a manual brake
   8.14. A cable of a manual brake
   8.15. The switch of a signal of braking
   8.16. A regulator of pressure of back brakes (dosing out and перепускной the valve)
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


8.14. A cable of a manual brake Replacement

PERFORMANCE ORDER
1. Remove the central section then access to a regulator is provided.
2. Release the lever of a brake and turn away a counternut and an adjusting (bottom) nut.
3. Remove a cable from the lever.
4. Working under the car, extend a cable, having passed through an aperture in a floor.
5. Remove from a frame cable arms.
6. Remove from a crank an axis (it is specified by an arrow) and bracket.
7. Turn away an arm bolt (it is specified by an arrow) on the jack and remove a cable.
8. Installation is carried out upside-down.
9. After assemblage adjust a manual brake.