Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and a steering
   9.1. Technical characteristics
   9.2. The stabilizer of a forward suspension bracket and the plug
   9.3. Forward and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (а/м FJ80)
   9.6. A cross-section bar (а/м FJ80)
   9.7. Suspension bracket levers (а/м FJ80)
   9.8. A rotary fist
   9.9. A steering wheel
   9.10. Steering draughts
   9.11. A reducer
   9.12. The hydraulic booster pump
   9.13. Removal of air from the wheel hydraulic booster
   9.14. Wheels and tyres
   9.15. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


9.2. The stabilizer of a forward suspension bracket and the plug

Removal

PERFORMANCE ORDER
1. Lift car redock.
2. Remove draughts of the stabilizer. On cars FJ60, 62 remember an assembly order of details of draughts of the stabilizer – plates and plugs.
3. For removal of draughts it is enough to turn out bolts from arms.
4. Turn away bolts of collars of plugs and remove the stabilizer.
5. Remove plugs of the stabilizer and check up their condition of plugs. The damaged plugs (cracks, hardening of rubber, etc. signs) replace. If necessary replace plugs of draughts of the stabilizer.

Installation

PERFORMANCE ORDER
1. Establish new plugs.
2. Insert plugs into collars and establish the stabilizer. Bolts do not tighten.
3. Establish draughts and tighten nuts with the set moment.
4. Tighten bolts of the stabilizer with the set moment.