Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   - 7.2. Automatic transmission
      7.2.1. Technical characteristics
      + 7.2.2. Transmission diagnostics
      7.2.3. Draught of the selector of transmission
      7.2.4. System of fixing of the selector
      7.2.5. A drive cable заслонки
      7.2.6. The blocking switch
      7.2.7. Transmission support
      7.2.8. Removal and transmission installation
   + 7.3. A distributing box
   + 7.4. Coupling, карданные shaft, semiaxes and leading bridges
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


7.2.4. System of fixing of the selector
THE GENERAL DATA

Arrangement of knots of system of fixing of the selector

1. The solenoid of blocking of a key
2. The solenoid of blocking of the selector
3. The block of management of the selector
4. The switch of blocking of the selector
5. The switch of a signal of braking

The system provides selector fixing in positions Park or Neutral at the pressed pedal of a brake. All works on service of system except described are carried out in car-care centre more low.

Check

PERFORMANCE ORDER
1. For access to system knots it is necessary to remove floor section.
2. Disconnect a socket and submit pressure from the battery on conclusions of the solenoid of blocking of the selector. If there is no characteristic click the solenoid replace.
3. Disconnect a socket of the solenoid of blocking of a key and check up resistance between conclusions 1и 5 (fig. at the left – for а/м 1991-95 гг), between conclusions 7 and 8 (fig. on the right – for а/м since 1995) which should be 12–17 Ohm.
4. Disconnect a socket from the switch of blocking of the selector and check up resistance between the specified conclusions.
5. In selector Park position between conclusions Р and Р1 there should be a chain.
6. In position of selector Park and the pressed button between conclusions Р and Р1 and Р and Р2 there should be a chain.
7. In other positions of selector R, N, D, 2 and L between conclusions Р and Р2 should be a chain.
8. If results of checks differ, replace faulty details and repeat checks.