Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   + 7.2. Automatic transmission
   - 7.3. A distributing box
      7.3.1. Technical characteristics
      7.3.2. Epiploons of forward and back flanges
      7.3.3. A pneumowire diaphragm (early models)
      7.3.4. The electric motor of a drive of a distributing box (late models)
      7.3.5. Removal and installation of a distributing box
   + 7.4. Coupling, карданные shaft, semiaxes and leading bridges
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

7.3.5. Removal and installation of a distributing box

CARS FJ60 and 62

Removal of a distributing box on these cars is interfaced to full dismantling of a distributing box and is enough difficult procedure which should be carried out in car-care centre.


1. Remove transmission in gathering with a distributing box (subsection 7.1.2 and subsection 7.2.8 see).
2. Clear transmission, remove all hinged arms and dustproof a casing. Include the mechanism of the central blocking of differential (if it is provided).
3. Put transmission vertically, a distributing box upwards. Turn away bolts of fastening of a box.
4. Cautiously, not to damage a back epiploon, raise a box and remove.
5. Before installation examine an epiploon and if necessary replace.
6. At assemblage turn a shaft of a distributing box so that it Slots have coincided with шлицами a transmission shaft.
7. Further assemblage is carried out upside-down.