Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. A mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. A distributing box
   - 7.4. Coupling, карданные shaft, semiaxes and leading bridges
      7.4.1. Technical characteristics
      + 7.4.2. Coupling
      + 7.4.3. Cardan () a shaft (), a reducer and axes
      7.4.4. A lobby полуось and an epiploon
      + 7.4.5. The back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


7.4.4. A lobby полуось and an epiploon
THE GENERAL DATA

Orientation of a holder and directing the SHRUS at assemblage

1. The big window

2. An acting part

3. The flat party

4. The expanded part

5. A narrow part

Removal

PERFORMANCE ORDER
1. Remove a nave.
2. Remove bearings of a forward wheel (subsection 2.39 see).
3. Turn away bolts of fastening and remove a brake board.
4. If forward brakes drum-type remove a brake in gathering, take aside and fix, without supposing sagging on a hose.
5. Blows of a soft hammer separate a pin from a rotary fist.
6. Remove a pin.
7. Disconnect a socket (it is specified by an arrow) and remove the gauge of speed (on cars with antiblocking system).
8. Turn полуось so that лыска on the SHRUS case has been turned upwards.
9. Cautiously, not to damage an epiploon, get полуось.
10. If necessary get an epiploon (it is specified by an arrow) by means of a shock stripper.

Dismantling

PERFORMANCE ORDER
1. Clamp полуось in a vice through a soft lining.
2. Beat out the SHRUS with an external axis blows on brass оправке.
3. Incline an internal holder and on one get hinge balls.
4. Get a holder in gathering with internal directing of the SHRUS case for what turn a holder of balls on 90 and combine windows in a holder with dredging in the case.
5. Get from a holder internal directing, for what сориентируйте these details.
6. Clear the SHRUS of greasing and examine. The damaged details replace.
7. At assemblage grease internal surfaces of the SHRUS and an external shaft молибденовой with greasing.
8. Insert directing to a holder upside-down.
9. Сориентируйте an acting part of wider part of a holder directing aside (fig. Orientation of a holder and directing the SHRUS see at assemblage).
10. Establish a holder and directing on a semiaxis shaft.

The prevention

At assemblage an acting part directing and wider part of a holder should be turned outside.


11. Establish on an internal shaft new lock rings.
12. Clamp полуось in a vice and establish an external shaft, having fixed a lock ring.
13. Be convinced of durability of fastening of external and internal sections of a semiaxis in the SHRUS.

Installation

PERFORMANCE ORDER
1. Establish a new epiploon (if necessary) and grease Slots an internal shaft.
2. Holding a shaft to a canopy, cautiously insert it into differential.
3. Further installation is carried out upside-down.