Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Additional maintenance service
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance service terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tyres and pressure in tyres
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Exhaust system check
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a distributing box
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. The thermostat of the air filter (carburettor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. System of catching of steams of gasoline
   2.24. System check рециркуляции
   2.25. Air заслонка the carburettor
   2.26. A zolotnik of system of ventilation картера
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of backlashes of valves
   2.30. Idling turns (carburettor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, бегунок and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a distributing box
   2.43. Oil replacement in a back (forward) reducer
   2.44. Backlashes in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

2.39. Naves and bearings of forward wheels

Check and greasing replacement

1. Bearings of forward wheels should be checked wheel rocking at each raising передка.
2. At detection люфта at rocking in a vertical plane it is necessary to disassemble knot and to check up a condition of bearings.
3. Remove a wheel.
4. Remove a support, take aside and fix.
5. Remove the mechanism of blocking of naves (subsection see).
6. Расконтрите an external nut also turn on.
7. Cнимите a washer, turn away an internal nut.
8. Cнимите a persistent washer.
9. Submit a nave on itself and back, get the external bearing.
10. Remove a nave.
11. Get an epiploon.
12. Remove the internal bearing.
13. Carefully wash out a nave and bearings solvent and dry.
14. Examine bearings and external holders. At detection of damages replace the bearing for what beat out a holder brass бородком and запрессуйте the new.
15. Put in the bearing refractory greasing.
16. Grease with a thin layer of a neck of a nave, internal surfaces of holders of bearings, epiploons and расточку under an epiploon.
17. Put greasing in a nave cavity between external holders, having formed a finger a fillet of greasing along the edges of holders.
18. Establish the internal bearing in a nave and cover with greasing a bearing end face.
19. Запрессуйте an epiploon заподлицо with a nave surface.


1. Establish a nave and the external bearing.
2. Dress a washer and wrap an internal nut with the moment 51 Н.м., simultaneously turning a nave.
3. Release a nut and again tighten with the moment 4,8 Н.м., simultaneously turning a nave. Be convinced that люфт is absent, and the wheel rotates freely.
4. Dress a lock washer and tighten an external nut with the moment 56 Н.м. Check up люфт, at presence люфта перезатяните an internal nut. Bend контровочные washer ledges in opposite directions.
5. Further assemblage is conducted upside-down. Slightly grease литолом knot of blocking of a nave (surplus of greasing is not supposed).