Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crosspieces
   11.4. Breakers
   11.5. The relay
   11.6. The breaker of indexes of turn / of the alarm system
   11.7. A combination of switches on a steering column
   11.8. The lock of ignition and a lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. A guard of devices
   11.11. The screen wiper electric motor
   11.12. The receiver and dynamics
   11.13. The aerial
   11.14. A heater of back glass
   11.15. Headlights
   11.16. The case halogen headlights
   11.17. A sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. Cruise-control system
   11.21. The electric drive window openers
   11.22. The electric drive of door-locks
   11.23. Safety pillows
+ 12. Electroschemes


11.18. Replacement of lamps LAMPS OF LATERAL INDEXES OF TURN

PERFORMANCE ORDER
1. On cars of early releases (FJ60, 62) turn away screws of a plafond of the index of turn and remove a plafond.
2. On cars of late releases (FJ80) turn away the top screw of fastening of the index.
3. Get the case of the index of turn and disconnect a socket. Turn the holder of a lamp counter-clockwise and get from the case.
4. The lamp is established upside-down.

LAMPS OF FACE-TO-FACE INDEXES OF TURN

PERFORMANCE ORDER
1. Turn away fastening screws (are specified by arrows) optical element of the index.
2. Turn the holder counter-clockwise and remove.
3. The lamp is established upside-down.

LAMPS OF THE SIGNAL OF BRAKING, BACK LANTERNS AND BACK INDEXES OF TURN

PERFORMANCE ORDER
1. On cars of early releases (FJ60, 62) turn away plafond screws. Get a lamp, having pressed and having turned counter-clockwise.
2. On cars of late releases (FJ80) open a door of a back compartment and turn away screws of fastening of the case of a back lantern in a doorway, then turn away the screw of a plafond and remove a back lantern in gathering.
3. Get the holder, having turned counter-clockwise and having pulled, get a lamp.
4. Installation is carried out upside-down.

LAMP OF ILLUMINATION OF LICENSE PLATE

PERFORMANCE ORDER
1. Turn away screws of fastening and remove a plafond, then get a lamp.
2. The lamp is established upside-down.

LAMP OF ILLUMINATION OF THE GUARD OF DEVICES

PERFORMANCE ORDER
1. Remove a guard of devices (subsection 11.10 see). The lamp gets from the back party of a guard.
2. To take turn a lamp counter-clockwise.
3. Installation is carried out upside-down.