Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crosspieces
   11.4. Breakers
   11.5. The relay
   11.6. The breaker of indexes of turn / of the alarm system
   11.7. A combination of switches on a steering column
   11.8. The lock of ignition and a lock drum
   11.9. Indexes of level of fuel, pressure and oil temperature
   11.10. A guard of devices
   11.11. The screen wiper electric motor
   11.12. The receiver and dynamics
   11.13. The aerial
   11.14. A heater of back glass
   11.15. Headlights
   11.16. The case halogen headlights
   11.17. A sound signal
   11.18. Replacement of lamps
   11.19. Lateral mirrors with the electric drive
   11.20. Cruise-control system
   11.21. The electric drive window openers
   11.22. The electric drive of door-locks
   11.23. Safety pillows
+ 12. Electroschemes

11.19. Lateral mirrors with the electric drive

The diagramme for check of the switch of lateral mirrors on cars FJ80 and a designation of contacts of a socket

The mirror drive in the majority of models is carried out from 2 electric motors of vertical and horizontal displacement.


1. Include ignition (the engine not to start) and lower lateral glasses. The selector which has been built in in the switch, include the necessary mirror and check up work of a drive of the right and left mirrors, displacing them to the right and to the left, upwards and downwards.
2. Hear to work of electric motors.
3. If work of electric motors is listened, and the mirror does not move, the mechanism of a drive in a mirror is faulty. Remove a mirror and disassemble.
4. If work of electric motors is not listened also mirrors not движутся check up a safety lock.
5. If the safety lock is serviceable, get the switch, without disconnecting wires. Include ignition and check up pressure on the switch. If pressure is not present, check up wires from a safety lock to the switch. Otherwise check up the switch for what execute the following.
6. Disconnect a socket and check up a switch chain under the applied diagramme. If contacts do not become isolated in the specified image the switch replace.
7. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crosspiece this wire on weight. If the mirror works normally with a crosspiece repair "regular" connection with weight.
8. If the mirror does not work, disassemble a mirror and check up pressure presence on wires. Include ignition and translate the switch in all positions, checking pressure. On one of wires from the switch there should be a pressure in its each position (except for position Off).
9. If pressure is absent, check up a chain from a mirror to the switch.
10. If pressure is, remove a mirror and check up its work, having executed connection through crosspieces. If the mirror does not work, replace it.