Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
- 4. Systems of cooling, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. The thermostat
   4.4. Крыльчатка the fan and гидромуфта
   4.5. A radiator and a broad tank
   4.6. Маслоохладитель
   4.7. The pump of system of cooling
   4.8. The gauge of temperature of a liquid
   4.9. The electric motor and a chain of the fan of a heater
   4.10. A heater radiator
   + 4.11. The control panel a heater and the conditioner
   4.12. A central air and heating
   4.13. Влагоотделитель the conditioner
   4.14. The conditioner compressor
   4.15. The condenser
   4.16. The evaporator and the broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


4.14. The conditioner compressor
THE GENERAL DATA

Details of fastening of the compressor

1. An arm
 

Removal and installation

PERFORMANCE ORDER
1. Depressurize the conditioner and remove a coolant in car-care centre.
2. Disconnect the battery from weight.
3. Remove from the compressor a belt.
4. Disconnect a socket, disconnect coolant tubes.
5. Turn away bolts of fastening and remove the compressor.
6. If the new compressor execute all procedures specified in the applied instruction is established.
7. Installation is carried out upside-down.
8. Replace all sealing rings, having picked up them as the compressor and having greased with special greasing (depends on type of an applied coolant).
9. Fill system in car-care centre.