Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
- 4. Systems of cooling, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. The thermostat
   4.4. Крыльчатка the fan and гидромуфта
   4.5. A radiator and a broad tank
   4.6. Маслоохладитель
   4.7. The pump of system of cooling
   4.8. The gauge of temperature of a liquid
   4.9. The electric motor and a chain of the fan of a heater
   4.10. A heater radiator
   + 4.11. The control panel a heater and the conditioner
   4.12. A central air and heating
   4.13. Влагоотделитель the conditioner
   4.14. The conditioner compressor
   4.15. The condenser
   4.16. The evaporator and the broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

4.5. A radiator and a broad tank

Radiator and adjacent details

1. A perepusknoj hose
2, 20. A radiator hose
3. Скоба battery fastenings
4. The battery
5. A tray
6. A casing
7. Крыльчатка and муфта
8. A forward lattice
9, 13. An arm
10. The drain crane
11. A lining
12. A radiator
14, 18. The amortizirujushchaja plug
15. A hose маслоохладителя
16, 19. The plug of a rack of a radiator
17. A radiator stopper
21. A hose of a broad tank

Removal and installation


1. Disconnect the battery from weight.
2. After full cooling of the engine merge a liquid.
3. Disconnect from a radiator the top and bottom hoses.
4. Disconnect from a radiator a tank hose.
5. Remove крыльчатку.
6. On cars equipped with automatic transmission disconnect from a radiator of the union of tubes of a cooler.
7. Substitute the pallet for gathering of the spilt liquid, muffle the union.
8. Turn away bolts of the central rack of a forward lattice.
9. Remove two top arms of fastening of a radiator. Turn away all bolts of fastening (are specified by arrows) radiator.
10. Remove a radiator, having lifted it upwards.
11. Check up presence of leaks from a radiator, mechanical damages, cleanliness of internal channels.
12. In need of radiator repair address in car-care centre as application of the special equipment and technologies will be necessary.
13. Cautiously clear intercostal spaces of a radiator, having blown its compressed air and having cleared a soft brush.
14. The radiator is established a radiator upside-down.
15. After radiator installation fill in a liquid.
16. Start the engine and be convinced of absence of a leak.
17. Warm up the engine and again check up level of a cooling liquid, if necessary restore.
18. On cars with automatic transmission check up level трансмиссионной liquids, if necessary restore.


1. On the majority of cars the tank simply gets from an arm close to the battery. Take aside a tee from a tank (it is specified by an arrow) and remove a tank from an arm (the right arrow).
2. Merge in a vessel a liquid from a tank, examine a tank.
3. At detection of signs of damages a tank replace.
4. The tank is established upside-down.