Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation

Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and a steering
   9.1. Technical characteristics
   9.2. The stabilizer of a forward suspension bracket and the plug
   9.3. Forward and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (а/м FJ80)
   9.6. A cross-section bar (а/м FJ80)
   9.7. Suspension bracket levers (а/м FJ80)
   9.8. A rotary fist
   9.9. A steering wheel
   9.10. Steering draughts
   9.11. A reducer
   9.12. The hydraulic booster pump
   9.13. Removal of air from the wheel hydraulic booster
   9.14. Wheels and tyres
   9.15. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

9.12. The hydraulic booster pump

The wheel hydraulic booster on engines 2F and 3F-E

1. The pump
2. A hose
3. A bolt
4. An arm
5. A belt
6. A nut
7. A pulley
8. A tube


1. Remove a drive belt (subsection 2.31 see).
2. Remove as much as possible liquid from a tank, disconnect and muffle a hose and a high pressure tube.
3. On cars with engines 2F and 3F-E turn away forward bolts of fastening of the pump. On cars with the engine 1FZ-FE turn away bolts of fastening of the pump to the block of cylinders.


1. Installation is carried out upside-down.
2. Tighten bolts and nuts with the set moment. On cars with the engine 1FZ-FE replace a sealing ring of the pump.
3. Remove air from a hydrodrive (subsection 9.13 see).