Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   - 3.2. The verhneklapannyj engine 1FZ-FE
      3.2.1. Technical characteristics
      3.2.2. Kinds of repair without engine dismantle
      3.2.3. A cover of a head of cylinders
      3.2.4. A soaking up collector
      3.2.5. A final collector
      3.2.6. Cam-shafts and pushers
      3.2.7. A head of cylinders
      3.2.8. A cover of a chain drive of cam-shafts
      3.2.9. A forward epiploon коленвала
      3.2.10. The oil pallet
      3.2.11. The oil pump
      3.2.12. A flywheel (a leading disk of the hydrotransformer)
      3.2.13. A back epiploon коленвала
      3.2.14. Suspension bracket and engine details
   + 3.3. Dismantle and engine major repairs
   + 3.4. An engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


3.2.1. Technical characteristics
THE GENERAL DATA

Order of numbering of cylinders and direction of rotation of the distributor of engines FZ-FE 1

The dark circle notes a conclusion of 1st cylinder of the distributor of ignition.

Working volume
4,5 l
Numbering of cylinders
1–2–3–4–5–6
Operating procedure
1–5–3–6–2–4
Cam-shaft (the sizes and backlashes in mm):
Diameter of basic necks
26,959 – 26,975
Backlashes in basic necks:
  – The standard
0,025 – 0,062
  – The limiting
0,1
Ovality
No more than 0,06
The size of cams:
  – The standard
50,61 – 50,71
  – The limiting
50,51
Axial люфт:
  – The standard
0,030 – 0,080
  – The limiting
0,10
Backlash in gearing of gear wheels of cam-shafts:
  – The standard
0,020 – 0,200
  – The limiting
0,30
Length of a spring of the valve a free condition
18,2 – 18,8
The oil pump:
  – A backlash between a conducted rotor and the case
0,100 – 0,175 (limiting 0,30)
     • the standard
0,100 – 0,170
     • the limiting
0,30
  – A backlash in gearing of rotors:
     • the standard
0,030 – 0,160
     • the limiting
0,25
  – A backlash between a rotor and a cover:
     • the standard
0,030 – 0,090
     • the limiting
0,150

The inhaling moments (in Н.м.)

Bolts of the levelling chamber of an air inlet
18
Bolts of a soaking up collector
18
Bolts of a final collector
36
Fastening of an exhaust pipe to a final collector
57
Fastening of a thermal guard to a final collector
16
Fastening of an air tube (PAIR-system):
  – Bolts
17
  – Nuts
18
Pulley bolt коленвала
370
Flywheel bolts
75
Bolts of a leading disk
58
Bolt of an inlet branch pipe of a heater
18
Roller bolts натяжителя
33
Bolts of a head of cylinders:
  – 1st stage
36
  – 2nd stage
To tighten on a corner 90
  – 3rd stage
To tighten on a corner 90
Bolts of fastening of a forward cover (chain of cam-shafts) to a head of cylinders
18
Bolts of fastening of covers of basic necks of a cam-shaft
15
Bolt of a conducted asterisk of a cam-shaft
68
Bolts of the oil pump
15
Nuts / fastening bolts маслоприемника
17
Oil atomizer
17
Bolts of the pallet of 1 (top):
  – A bolt with a head 14
39
  – A bolt with a head 12
17
  – Bolts of fastening of the pallet 1 to a forward cover
17
Bolts of the pallet 2 (bottom):
  – A bolt
6,9
  – A nut
7,8
Bolts of the gauge of level of oil
4,8
The reduktsionnyj valve
44
Bolts of the holder of a back epiploon
18
Nuts and bolts of a forward cover
18
Nuts натяжителя chains
18