Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1. Engines 2F and 3F-E
      3.1.1. Technical characteristics
      3.1.2. Kinds of repair without engine dismantle
      3.1.3. Installation of the piston of 1st cylinder in ВМТ
      3.1.4. A cover of a head of cylinders
      3.1.5. A lateral cover of the mechanism timing
      3.1.6. Коромысла and bars of pushers
      3.1.7. Springs of valves, plates, маслосъемные caps
      3.1.8. Soaking up and final collectors
      3.1.9. A head of cylinders
      3.1.10. Pushers
      3.1.11. A pulley коленвала
      3.1.12. A forward epiploon коленвала
      3.1.13. A forward cover
      3.1.14. A cam-shaft and drive gear wheels
      3.1.15. A cam-shaft and support
      3.1.16. Replacement of bearings
      3.1.17. The oil pallet
      3.1.18. The oil pump
      3.1.19. A flywheel (a leading disk of the hydrotransformer)
      3.1.20. A back epiploon коленвала
      3.1.21. Suspension bracket and engine details
   + 3.2. The verhneklapannyj engine 1FZ-FE
   + 3.3. Dismantle and engine major repairs
   + 3.4. An engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


3.1.1. Technical characteristics
THE GENERAL DATA

Order of numbering of cylinders and direction of rotation of the distributor of engines 2F and 3F-E

The dark circle notes a conclusion of 1st cylinder of the distributor of ignition.

The engine 2F

Working volume
4,2 l
Numbering of cylinders
1–2–3–4–5–6
Operating procedure
1–5–3–6–2–4
Cam-shaft (the sizes and backlashes in mm)
Diameter of basic necks
  – 1st
47,955 – 47,975
  – 2nd
46,455 – 46,475
  – 3rd
44,955 – 44,975
  – 4th
43,455 – 43,475
Backlashes in basic necks
  – The standard
0,025 – 0,075
  – The limiting
0,1
  – Ovality
No more than 0,15
The size of cams
The standard
  – Inlet valves
38,36 – 38,46
  – Final valves
38,25 – 38,35
The limiting
  – Inlet valves
38,00
  – Final valves
37,90
Axial люфт
  – The standard
0,200 – 0,262
  – The limiting
0,3
Backlash in gearing of gear wheels of a drive of a cam-shaft
  – The standard
0,05 – 0,13
  – The limiting
0,2

The inhaling moments (in Н.м.)

Bolts of fastening of a persistent washer of a cam-shaft to the block of cylinders
10,8
Pulley nut коленвала
175
Bolts of a head of cylinders
110
Bolts of fastening of a leading disk to коленвалу
78
Bolts of collectors
39
Bolts of fastening of a flywheel to коленвалу
73
Bolts of fastening of the oil pallet
14
Bolts of fastening of the oil pump
17
Bolts коромысел
  – М8
21
  – М10
30
  – Bolts of a cover of a head of cylinders
7,8
Bolts of a forward cover
  – М10
20
  – М6
6

The engine 3F


Working volume
4,0 l
Numbering of cylinders
1–2–3–4–5–6
Operating procedure
1–5–3–6–2–4

Cam-shaft (the sizes and backlashes in mm)

Diameter of basic necks
  – 1st
47,955 – 47,975
  – 2nd
46,455 – 46,475
  – 3rd
44,955 – 44,975
  – 4th
43,455 – 43,475
Backlashes in basic necks
  – The standard
0,025 – 0,075
  – The limiting
0,1
  – Ovality
No more than 0,15
The size of cams
The standard
  – Inlet valves
38,36 – 38,46
  – Final valves
38,25 – 38,35
The limiting
  – Inlet valves
38,00
  – Final valves
37,90
Axial люфт
  – The standard
0,200 – 0,290
  – The limiting
0,3
Backlash in gearing of gear wheels of a drive of a cam-shaft
  – The standard
0,100 – 0,183
  – The limiting
0,25

The inhaling moments (in Н.м.)

Bolts of fastening of a persistent washer of a cam-shaft to the block of cylinders
10,8
Pulley nut коленвала
310
Bolts of a head of cylinders
110
Bolts of fastening of an arm to a head of cylinders
27
Bolts of fastening of a soaking up collector to an arm
27
Bolts of fastening of a leading disk to коленвалу
76
Bolts of collectors
  – A bolt () on a turn-key basis 17
64
  – A bolt () on a turn-key basis 14
45
  – A nut () on a turn-key basis 14
49
Bolts of fastening of a flywheel to коленвалу
76
Bolts of fastening of the oil pallet
8,4
Bolts of fastening of the oil pump
17
Bolts коромысел
  – A bolt on a turn-key basis 12
22
  – A bolt on a turn-key basis 14
30
Bolts of a forward cover
  – A bolt () on a turn-key basis 10
4,3
  – A bolt () on a turn-key basis 10
4,3
  – A bolt () on a turn-key basis 14
22