Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Additional maintenance service
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance service terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tyres and pressure in tyres
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Exhaust system check
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a distributing box
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. The thermostat of the air filter (carburettor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. System of catching of steams of gasoline
   2.24. System check рециркуляции
   2.25. Air заслонка the carburettor
   2.26. A zolotnik of system of ventilation картера
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of backlashes of valves
   2.30. Idling turns (carburettor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, бегунок and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a distributing box
   2.43. Oil replacement in a back (forward) reducer
   2.44. Backlashes in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


2.34. Check and adjustment of pedals of coupling (brake)
PERFORMANCE ORDER
Pedal height
1. Check up distance of pillows of pedals from a floor. If this distance differs from norm adjust.
2. For adjustment of a pedal of coupling release a counternut of an adjusting bolt () and wrap a bolt. Then release a counternut of a rod of the main cylinder (). Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod counternut.
3. For check of height of a pedal of a brake start the engine and press some times a pedal then check up pedal height. For adjustment release a counternut of an adjusting bolt (or the switch), release a rod counternut. Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod counternut.
4. Wrap the switch or a bolt clockwise before contact with a pedal platform. Tighten a counternut.
Pedal free wheeling
5. Press a pedal a finger and measure distance to sensation of a weakness in resistance to moving.
6. In need of adjustment of a free wheeling of a pedal of coupling release a counternut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a counternut.
7. For adjustment of a free wheeling of a pedal of a brake on the stopped engine press 6 times a pedal then check up a course. Release a counternut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a counternut.