Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and car operation



Toyota Land Cruiser
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Additional maintenance service
   2.2. Technical characteristics
   2.3. An arrangement of units in a motor compartment
   2.4. Maintenance service terms
   + 2.5. Check of level of liquids
   2.6. Check of a condition of tyres and pressure in tyres
   2.7. Liquid level in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Check of a condition and care of the battery
   2.11. Check of system of cooling
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check and replacement of brushes of a cleaner of a windscreen
   2.14. Shift of wheels
   2.15. Suspension bracket and steering check
   2.16. Exhaust system check
   2.17. Check of level of oil in a manual transmission
   2.18. Check of level of oil in a distributing box
   2.19. Check of level of oil in reducers of bridges
   2.20. Check of a condition of seat belts
   2.21. The thermostat of the air filter (carburettor engines)
   2.22. Check and greasing of the exhaust valve
   2.23. System of catching of steams of gasoline
   2.24. System check рециркуляции
   2.25. Air заслонка the carburettor
   2.26. A zolotnik of system of ventilation картера
   2.27. Check and replacement of the air filter
   2.28. Replacement of spark plugs
   2.29. Check and adjustment of backlashes of valves
   2.30. Idling turns (carburettor engines)
   2.31. Drive belts
   2.32. Check of fuel system
   + 2.33. Check of brakes
   2.34. Check and adjustment of pedals of coupling (brake)
   2.35. Replacement of the fuel filter
   2.36. High-voltage wires, бегунок and distributor covers
   2.37. Check and installation of the moment of ignition
   2.38. Care of cooling system
   2.39. Naves and bearings of forward wheels
   2.40. Liquid replacement in automatic transmission and the filter
   2.41. Oil replacement in a manual transmission
   2.42. Oil replacement in a distributing box
   2.43. Oil replacement in a back (forward) reducer
   2.44. Backlashes in valves on the engine 1FZ-FE
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes


// Mainlink code include_once($_SERVER['DOCUMENT_ROOT'].'/links/mainlink.php'); // Настройки кода для отображения ссылок // Указание коду отображать ссылки, а не объявления $o['CODE_TYPE'] = 'l'; // Ваш секретный код для ссылок в системе Mainlink $o['USERNAME'] = 'D3C1A7E0BD70A9A7462AECE3124AE0BE'; // Кодировка выводимых ссылок. Preset: win, utf, iso, koi. Default: utf. Либо любая другая кодировка в понятном для ICONV виде. $o['charset'] = 'utf'; // Принудительное указание адреса страницы. Default: $_SERVER['REQUEST_URI']. Пример: '/page123.aspx?id=2'. $o['request_uri'] = false; // Разделитель между текстами ссылками. Default: ' | ' $o['splitter'] = ' | '; // HTML блок перед каждым текстом ссылки в блоке. Default: '' $o['htmlbefore'] = ''; // HTML блок после каждого текста ссылки в блоке. Default: '' $o['htmlafter'] = ''; // Значение атрибута STYLE для каждого тэга A в блоке ссылок. Default: '' $o['style'] = ''; // Значение атрибута TARGET для каждого тэга A в блоке ссылок. Default: '' $o['target'] = ''; // Значение атрибута CLASS для каждого тэга A в блоке ссылок. Default: '' $o['class_name'] = ''; // Поместить ли весь блок со ссылками в тэг SPAN. Possible: true, false. Default: false. $o['span'] = false; // Значение атрибута STYLE для тэга SPAN в который помещен блок ссылок. $o['style_span'] = false; // Значение атрибута CLASS для тэга SPAN в который помещен блок ссылок. $o['class_name_span'] = false; // Поместить ли весь блок со ссылками в тэг DIV. Possible: true, false. Default: false. $o['div'] = false; // Значение атрибута STYLE для тэга DIV в который помещен блок ссылок. $o['style_div'] = false; // Значение атрибута CLASS для тэга DIV в который помещен блок ссылок. $o['class_name_div'] = false; // Если используются значения span = true и div = true, то указанный этим параметром тэг будет выводиться первым. Default: div. $o['div_span_order'] = 'div'; // Формат выдачи блока ссылок. Если установлено значение array, то результатом будет массив со ссылками блока, при этом внешнего оформления блока проводится не будет. Possible: text, array. Default: text. $o['return'] = 'text'; // Параметр для использования нескольких блоков ссылок на одной страничке, задает индекс ссылки с которой начать выдачу. Индекс первого элемента массива: 0. Default: 0. $o['limit_start'] = 0; // Параметр для использования нескольких блоков ссылок на одной страничке, задает количество ссылок для выдаче после стартового элемента. Отсутствие ограничений: 0. Default: 0. $o['limit_items'] = 0; // Время хранения базы со ссылками в секундах. Default: 3600. $o['update_time'] = 3600; // Время отведенное на обновление базы со ссылками в секундах. То есть время, которое код будет игнорировать повторные запросы на обновление кода. Default: 300. $o['update_lock_time'] = 300; // Максимальное количество ссылок для вывода в блоке. Default: 20. $o['max_links'] = 20; // Время на соединение с серверами Mainlink для обновления базы со ссылками. Если соединение пройдет успешно, то далее код будет скачивать базу ссылок, ограничения по времени на эту операцию отсутствуют в коде и определяются параметрами настройки PHP на Вашем хостинге, а конкретнее параметром максимального времени запущенного скрипта. Обычно это 30 секунд. Default: 6. $o['socket_timeout'] = 6; // Параметр точного соответствия запрашиваемого адреса для URL ссылки. $o['exact_match'] = true; // Отображать ли коду тестовую ссылку? В режиме true выведет 1 тестовую ссылку. Использовать как помощник при установке кода. Possible: true, false. Default: false. $o['test'] = false; // Сколько тестовых ссылок отобразить. Default: 1. $o['test_num'] = 1; // Формат выдачи массива со ссылками для показа на сайте. По умолчанию используется false, что регламентирует прием данных в виде сериализованного массива. Для сайтов, где размещено более 1000 ссылок рекомендуется ставить значение на true, всем остальным оставить false. $o['plain_output'] = false; $client_lnk = new MLClient($o); echo $client_lnk->build_links(); ?>

2.36. High-voltage wires, бегунок and distributor covers
THE GENERAL DATA

Characteristic defects of a cover of the distributor

1. Cracks on a wire conclusion

2. Cover cracks

3. Breakdown

4. Erosion of electrodes

5. Deterioration of a piece of coal

Check and replacement

PERFORMANCE ORDER
1. High-voltage wires of spark plugs should be checked (and if necessary to change) simultaneously with replacement of candles.
2. The elementary way of check consists in survey of wires on the working engine in the blacked out garage. At detection of a luminescence (breakdown) of a wire replace. Check up a condition of a cover and бегунка the distributor.
3. For check and clearing of wires disconnect each wire separately. On cars of late releases it is required to remove an overlay on a cover of a head of cylinders. Disconnect a wire on a distributor cover. Check up a condition of contacts of wires and sealants. Wipe wires. A wire strongly do not bend, as the current-carrying vein can break. At detection of cracks, traces of breakdown and подгорания wires replace.
4. Check up corrosion presence on sockets of tips of wires (from both parties) and conclusions of candles. Check up durability of demountable connection, having dressed on a candle a tip of a wire and having shaken it. At leaky connection draw in contact petals.
5. Turn away screws of fastening and uncover the ignition distributor. Wipe a cover absolutely and check up presence inside and outside of a cover of cracks, traces of superficial breakdown (the thin charred paths), deterioration, подгорания and easings of contacts (fig. Characteristic defects of a cover of the distributor see).
6. Remove бегунок (a photo at the left) and examine in the places specified by arrows on a photo on the right.
7. If the old cover check up resistance between a conclusion of a cover and a candle is established. If resistance exceeds norm replace a cover and a wire. Change each wire separately.